DOWNLOADS

LEARN MORE

MyTemp System Diagram

How it Works

MyTemp room-by-room zone control uses your (1) existing heating and cooling equipment and (2) ductwork. When the MyTemp system is installed in your home, a wireless (3) Smart Controller™ is placed in each room. It perodically measures and transmits the room's temperature. A (4) wireless receiver collects this information and passes it along to the (5) master unit. Using temperature information from each room as well as temperature data from an (6) outside monitor, sophisticated software determines which rooms need conditioning. Using air pressure and vacuum supplied from an external (7) air pump and power supply individual rooms are included or removed from the conditioning cycle by opening and closing (8) dampers located in the ducts. The master unit then activates the heating, cooling, and circulation equipment in your home to achieve your settings. Using information from the (9) HVAC sensor, the master unit can determine how many dampers can be simultaneously closed without affecting your equipment. You can adjust the temperature for single rooms, groups of rooms, or the entire home using the touch-screen on the (10) main display. Once set up, the MyTemp system automatically maintains your temperature settings throughout your house.

System Components

  • MyTemp Edit Zones Screen

    Main Display

    Installed Location: replaces your thermostat

    The MyTemp touch-screen main display makes managing the temperature in your home easy. From one convenient location you can make temperature schedules, create and edit zones, and view your homes energy history.  A large, 5.7" backlit screen makes viewing effortless in any lighting.  The main display replaces your current thermostat and utilizes the existing wiring for a hassle-free installation.

  • MyTemp Edit Zones Screen

    Wireless Smart Controller™

    Installed Location: one in each room

    The key to room-by-room zone control is knowing the temperature in each room, that's the purpose of MyTemp's wireless Smart Controllers.  These small sensors are placed in each room and provide the current temperature to the MyTemp Master Control Unit.  Being wireless, MyTemp's Smart Controllers do not require any remodeling or wiring to install and their two, AAA batteries will transmit the temperature for several years. For added convenience you can make temporary temperature adjustments or place the room in energy conserving SAVER mode right from the Smart Controller.

  • MyTemp Edit Zones Screen

    Pneumatic Damper

    Installed Location: in the ductwork, one for each register

    MyTemp regulates the airflow to each register using pneumatic dampers.  When the damper is inflated, airflow to that register is turned off; when the damper is deflated, airflow is turned on. The dampers are tough, designed for years of trouble-free service, and flexible, to provide a tight seal. Our patented installation technique allows us to insert dampers into your ductwork without cutting into walls or floors.  The process is quick and mess-free.

  • MyTemp Edit Zones Screen

    Master Control Unit

    Installed Location: next to your furnace

    The Master Unit continually monitors the temperature in every room of your home. In addition, it operates your HVAC equipment and monitors the conditions in your air handler. Using information from the Smart Controllers and your temperature schedules, up to 24 computer-operated valves control pneumatic dampers, giving each room independent temperature control.

  • MyTemp Schedule Screen

    Air Pump and Power Supply

    Installed Location: next to your furnace

    The Air Pump and Power Supply plugs into a standard electrical outlet to provide power to the MyTemp Master Control Unit. In addition, an internal air pump provides vacuum and pressure to deflate and inflate the dampers, respectively. The Air Pump and Power Supply is specially designed to provide years of quiet, efficient, and reliable operation.